Geotechnical Drilling Belle Chasse The Advantages of Using Geotechnical Drilling

/in , /by

Belle Chasse, Louisiana developers and even homeowners can benefit from turning to an expert geotechnical drilling contractor to help evaluate a site where you’re planning to build a new structure or suspect that there is an underlying problem such as a void that could collapse into a sinkhole.

So what is geotechnical drilling? Belle Chasse drilling contractors use portable drilling rigs which are transported to the site to drill into the earth at strategic locations (which will vary depending upon the nature of the project and the type of info that you’re seeking.) Core samples are typically extracted from the ground. These vertical columns of ground are located within a large tube that is pulled out of the earth and sent out for testing to evaluate the composition, the size and location of the different layers, the amount of water content in the soil, the density of the earth layers and bedrock and the overall integrity and suitability of the location for the building project that’s planned for the site.

During the drilling procedure, it’s possible that an underground void could be detected, signaling the site that could be the location of a future sinkhole if the conditions deteriorate to the point where a collapse occurs.

The timeframe and expense associated with geotechnical drilling does vary quite a bit depending upon the size of the area that’s being analyzed, the number of core samples and drilling sites that are required, the density of the ground and the depth of the drilling.

Why Should I Hire a Contractor to Perform Geotechnical Drilling?

Belle Chasse clients can gain lots of insight and important data from geotechnical drilling.

In addition, Louisiana is perched atop limestone bedrock. Limestone is a very soft stone that can dissolve when it’s exposed to acids that are naturally found in groundwater. The result may be the formation of a large underground cavity that can ultimately collapse, swallowing homes, cars and even people.

With the help of an expert in geotechnical drilling, Belle Chasse property owners and developers can get a better idea of the stability and integrity of a building site or the site of a current structure. It’s also key for identifying areas that could have underground voids that are at risk of collapse. Through sinkhole remediation, these voids can be filled with cement, preventing a catastrophic collapse. Long metal rods can also be drilled into the bedrock, with the other end secured to the building’s foundation to offer support even if the ground gives way.

Overall, geotechnical drilling is a minimally invasive and cost effective option for evaluating a site of a current home or structure or a future building.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Orient Park A Look at the Workings of Geotechnical Drilling

/in , /by

Orient Park developers, homeowners and others can use geotechnical drilling for a few different purposes, ranging from site evaluation to sinkhole detection and beyond.

Geotechnical drilling offers a relatively cost-effective and efficient method for determining the composition and stability of the ground at a particular site, which is important for builders and developers when planning for the construction of a large structure. Depending upon the findings, the developers may opt to alter their plans for the site or they may pursue additional investigative measures, such as the use of ground penetrating radar or sinkhole remediation.

The cost and timeframe of the geotechnical drilling project does vary quite dramatically, depending upon factors such as:

  • the size of the site that’s being evaluated;
  • the reason for the geotechnical drilling operation;
  • the composition and density of the stone found underground; and
  • the depth of the drilling operation.

A small site may require just a couple of days’ worth of drilling, while a larger site with dense stone and/or deep drilling depths may require several weeks of work or longer.

What Happens When You Perform Geotechnical Drilling?

Orient Park property owners and developers can gain lots of insight with this specialized variety of drilling, which is performed using portable drilling rigs.

With geotechnical drilling, Orient Park service providers will typically use a hollow “tube” to extract a vertical column of earth. This core sample provides analysts with some critical information, such as the composition and thickness of each layer, the moisture content of each layer, the integrity of stone layers or bedrock and the depth of the bedrock. This information is key for determining the suitability of a site for a specific construction project.

In addition, geotechnical drilling may reveal the presence of an underground void, which could collapse into a sinkhole. Areas with limestone bedrock, such as Florida, are especially prone to underground voids because limestone is a soft stone that can dissolve when exposed to mild acids. Even the acids in groundwater can deteriorate the rock, resulting in the formation of a cavity that can collapse into a dangerous or deadly sinkhole. Once identified, the void can be filled with cement to prevent collapse and measures can be implemented to reinforce any structures using long rods that are penetrated into the bedrock, with the other end secured to the foundation.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Palm River-Clair Mel How and Why to Perform Geotechnical Drilling

/in , /by

Palm River-Clair Mel area developers and property owners can benefit from the use of geotechnical drilling, which may be used to determine the suitability of a prospective building site or even reveal the presence of an underground void that could collapse into a sinkhole.

Geotechnical drilling is quite efficient in terms of time and expense. The cost of a geotechnical drilling project will depend upon the size of the site that’s being evaluated and the reasons for the drilling (which, in turn, determines how many drilling sites are required.)

Other factors that can determine cost include the depth of the drilling, along with the ground composition and density.

There are some additional measures that may be pursued based upon the results of the geotechnical drilling. Palm River-Clair Mel property owners or developers may need to use ground penetrating radar to evaluate the site more comprehensively. If signs of an underground void are located, you may need to perform sinkhole remediation. Efforts may include drilling into the void, which is then filled with cement to avoid a future collapse. In other cases, a structure could be reinforced by driving strong metal rods into the bedrock. The end of the rod at the ground’s surface is affixed to the foundation. This secures the building, so even if the ground gives way, the building will remain standing.

What is the Process for Performing Geotechnical Drilling?

Palm River-Clair Mel natives can expect the geotechnical drilling firm to arrive with one or more portable drilling rigs, which are placed in strategic locations.

Once drilling begins, a hollow rod is drilled into the ground to collect a sample of the various layers of earth. These samples, called core samples, are sent out to a laboratory for evaluation and testing. Large structures must be built atop stable, strong ground, so the laboratory analysis can reveal if the earth is suitable for a particular project. The analysts will examine a number of different attributes, including:

  • the composition of the ground layers;
  • the density and overall integrity of bedrock and stone;
  • the depth of the bedrock and various earth layers; and
  • the moisture content of the earth.

Based on the results of the geotechnical drilling, Palm River-Clair Mel property owners and developers can make informed decisions that will cut costs, while increasing overall safety in an existing or future structure.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

 

Geotechnical Drilling Pebble Creek What are the benifits of Geotechnical Drilling

/in , /by

Pebble Creek is the site of many new developments, but it’s a region that’s also prone to sinkholes, which means that the area is a prime location for geotechnical drilling. Pebble Creek area developers and property owners may opt to pursue geotechnical drilling efforts as a method for evaluating the ground in a particular location.

What is the Purpose of Geotechnical Drilling?

Pebble Creek natives can use geotechnical drilling for a number of different projects. A geotechnical drilling service provider can provide lots of useful insight for property owners and developers, including:

  • the density of the underlying bedrock;
  • the ground composition and the thickness of the various layers of earth;
  • the moisture content of the ground;
  • the integrity and overall quality of the underlying stone; and
  • Identifying the location of underground cavities.

Underground cavities can form in areas with limestone bedrock. This is because the limestone is a relatively soft stone that can dissolve when exposed to acids, even mild acids from acid rain or groundwater that percolates through the earth. Over time, the stone dissolves and erodes, resulting in a large void that can eventually collapse. The result is a sinkhole, which can swallow an entire city block in a matter of mere seconds.

In a location that’s seeing ground shifts and buildings are exhibiting signs of sinking and other movement (such as cracks in the foundation, stucco and concrete blocks that comprise a building), geotechnical drilling crews may be called in to investigate.  If a site is determined to be prone to sinkholes, existing buildings can be reinforced using metal rods that are affixed to the foundation at one end and driven into the bedrock at the other end. A drilling crew can also penetrate the cavity, which may then be filled with cement to reinforce the void and reduce the risk of a future collapse.

Sinkholes aside, large structures require stable ground and good quality bedrock. So developers may call in geotechnical drilling crews to extract core samples for analysis of the site. A core sample is a vertical column of earth that is extracted inside a large “tube” and sent out for analysis at a laboratory. The lab technicians will evaluate the composition, density, moisture content, the depth of the bedrock, and the overall quality of the bedrock and overlaying layers.

Based on the findings from the geotechnical drilling, Pebble Creek developers and property owners can develop plans for a safe structure that will remain standing for many decades to come.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Progress Village Process and Uses for Geotechnical Drilling

/in , /by

Progress Village is home to many builders and developers who can benefit from geotechnical drilling, which can be used to evaluate the integrity and the composition of the earth in a particular location.

Geotechnical drilling can be used to obtain lots of important information about a site’s underground geology, including evaluating the composition of the ground and the various layers, determining the thickness of the underground layers, evaluating the depth of the bedrock layer and even identifying sites that can be prone to sinkhole formation.

Why Do You Perform Geotechnical Drilling?

Progress Village geotechnical drilling services can perform a drilling project over the course of a couple days for a small site to weeks or longer for a large site with dozens of different drilling locations. The price of geotechnical drilling operations is largely dependent upon the extent and nature of the project.

Geotechnical drilling is a cost effective method for extracting core samples. Portable drilling rigs are brought to the site, where the drill penetrates into the ground, extracting a vertical tube of earth that depicts the various layers, their depth and thickness, and the exact composition. These are important factors when building a new structure or addressing a potential issue with an existing structure. The core samples are usually sent out for analysis to evaluate the integrity, strength and moisture content of the earth.

Using the data from the lab analysis, a developer can determine if a site is suitable for a building project or whether revisions may need to be made in order to accommodate the ground composition.

Geotechnical drilling is also used for sinkhole detection. Sometimes, the underground voids that collapse into a sinkhole are found accidentally during a drilling operation, while in other cases, a known void is evaluated for size and depth. Once discovered, a void can be pumped full of cement which reinforces the ground and prevents a collapse into a sinkhole.

Areas with limestone bedrock are especially prone to sinkholes because limestone is a soft rock that dissolves when exposed to acidic groundwater.

Sinkhole remediation efforts that follow geotechnical drilling efforts can also include the placement of metal rods, which are affixed to a structure’s foundation and sunk into the bedrock. The geotechnical drilling operation can identify the depth of the bedrock. Once complete, these reinforcements prevent the building from collapsing if the ground gives way.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Riverview Applications for Geotechnical Drilling 

/in , /by

Riverview builders, property owners and developers often utilize geotechnical drilling services to evaluate the integrity or composition of a building site or the location of an existing structure. Geotechnical drilling has a number of potential applications, including:

  • Evaluating earth composition;
  • Evaluating the integrity and stability of the earth;
  • Identifying areas that are prone to sinkholes; and
  • Determining the depth of the underlying bedrock.

How Do You Perform Geotechnical Drilling?

Riverview geotechnical drilling service providers typically begin the project by transporting portable drilling rigs to the location that will be evaluated. A geotechnical drilling project can take anywhere from just a couple days to several weeks or even longer in the case of a large site that requires dozens of drilling sites/core samples, a site with dense varieties of stone or a project that requires extremely deep drilling depths. Expense also largely depends upon the timeframe, so it’s best to consult your service provider to get a better idea of the timeframe and cost for your geotechnical drilling project.

Geotechnical drilling usually involves the extraction of core samples. Core samples are vertical columns of earth that are removed in a large “tube” that is sent to the laboratory for comprehensive analysis. The analysts will look at many traits such as the composition of the various layers, the degree of moisture saturation, the depth and thickness of the different underground layers and the integrity and strength of the bedrock or other stone samples.

Based on the core sample analysis, the developers, builders or property owners can make informed decisions on whether to build on a particular site and what types of structures may be suitable for the location. In some cases, the developer may need to find an entirely new building site.

Geotechnical drilling can also be helpful for sinkhole detection efforts. In fact, potential sinkholes in the form of underground voids and cavities can be found accidentally during geotechnical drilling. Riverview and the surrounding area sits atop limestone bedrock, which can dissolve when exposed to acidic groundwater. The dissolving stone may rinse away, leaving a void that can collapse into a sinkhole.

Factors such as the weight of overlying structures and the moisture content of the earth can trigger a collapse. If a void is found, a line can be drilled into the space, which is then filled with cement to reinforce the void. Geotechnical drilling rigs can also determine the quality and depth of bedrock, which is important for cases where reinforcement poles are sunk into the bedrock and then attached to a building’s foundation to offer support, even if the ground shifts of collapses.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Northdale Why Do Experts Perform Geotechnical Drilling

/in , /by

Northdale developers and property owners use geotechnical drilling to obtain essential information about the underground geology of a site. From evaluating a piece of property for its suitability as a building site to determining why an area is undergoing ground shifting, geotechnical drilling has many potential applications.

Whether you’re attempting to learn more about what lies beneath a future development site to evaluating an area for possible sinkhole locations, geotechnical drilling offers an affordable and relatively time-efficient option for researching a site. In some cases, drilling may reveal that pricier, comprehensive investigative efforts such as ground penetrating radar, are necessary at a particular location.

In many cases of geotechnical drilling, Northdale drill operators will use a hollow drill bit to extract a tall cylinder of earth. This captures each ground layer without altering the density or thickness, making it great for lab analysis. Lab analysis is used to determine:

  • The composition of each layer;
  • The thickness and depth of each ground layer;
  • The layer or stone density;
  • The ground moisture content;
  • The integrity and strength of the various layers or the stone.

Based on this information, experts and engineers can determine if a site is safe and suitable for constructing a large structure. You can also determine if building plans should be altered to ensure safety and long term integrity. In other cases, sinkhole remediation efforts may be required. Sinkhole remediation may be needed if an underground void is located. Areas with limestone bedrock are very prone to sinkholes because this type of stone dissolves when exposed to even mild acids (like the acid that is collected by groundwater as it moves through the earth’s various layers.)

How Long Does it Take to Perform Geotechnical Drilling?

Northdale geotechnical drilling companies will transport portable drilling rigs to the site that’s under investigation. Factors like the size of the site, the density of the ground and any stone layers, along with the depth of the drilling efforts will impact the timeframe, which in turn, affects cost. In cases where core analysis is required, there may be additional laboratory analysis-related expenses.

The timeframe may range anywhere from a couple days for a small site with soft ground or weeks in the case of a large multi-acre site with dense ground layers and deep depths.

It’s best to consult a geotechnical drilling firm to discuss your exact project to get an accurate idea of expense and timeframe.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Lutz The Uses for Geotechnical Drilling

/in , /by

Lutz area developers, property owners and builders alike turn to geotechnical drilling for essential information and insight into the composition, integrity and structure of the earth in a particular location, resulting in more informed decision making for structures on the property.

Geotechnical drilling is a technique that’s used to extract core samples – a vertical core of earth that can be evaluated and analyzed in a laboratory. Based on this analysis, you can determine the location and composition of the various layers, along with the overall integrity and strength of stone and bedrock, among many other qualities. This is all vital information when it comes to determining if a site is safe for building a new structure or if an existing structure is at risk of catastrophic failure due to shifting and even collapse into a sinkhole.

What’s the Process for Geotechnical Drilling?

Lutz geotechnical drilling companies will arrive on-site with portable drilling rigs that are used to penetrate into the earth and extract core samples. The number of the core samples and the depth of each drilling operation varies depending upon the nature of the project. These factors, combined with the hardness of the stone and bedrock at the site, impact the timeframe and the cost of the geotechnical drilling project.

Core samples can reveal some vital information, including:

  • the number, depth and thickness of the underground layers;
  • the density and moisture content of the earth’s layers;
  • the depth of the earth overlaying the bedrock; and
  • the composition, quality and integrity of the bedrock.

Based upon the core samples extracted during geotechnical drilling, Lutz developers can determine if a site is suitable for a particular building project. Or if a structure is already on the site, a determination can be made if the structure requires revision or reinforcement to ensure its safety and integrity.

In some cases, geotechnical drilling can reveal the presence of potential sinkholes. Underground cavities form fairly easily in areas with limestone bedrock because limestone dissolves when exposed to the mild acids found in groundwater.

If a void is located, it can be pumped full of concrete to avoid a catastrophic collapse into a sinkhole. Existing buildings can also be reinforced by running a metal pin down into the bedrock (the geotechnical drilling operation can be useful in determining how deep the pins must penetrate). The end at the surface is attached to the foundation, offering added stability in the event of ground shifting or even collapse.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

 

Geotechnical Drilling Lake Magdalene A Look at the Uses for Geotechnical Drilling

/in , /by

Lake Magdalene developers, builders and property owners may turn to a geotechnical drilling firm for help with a few different types of projects. From determining the composition of the land, to evaluating a site for a construction project or even identifying areas that are prone to sinkholes, geotechnical drilling has lots of potential uses.

The Uses and Process for Geotechnical Drilling

Lake Magdalene geotechnical drilling companies offer services for a number of situations. The timeframe for a geotechnical drilling project varies depending upon the size of the area that’s being analyzed, combined with the nature of the investigation. The composition of the earth and the depth of the drilling operation also impacts timeframe, since harder substances and deeper depths require a longer drilling timeframe.

The process usually begins with the arrival of portable drilling rigs that are set up on-site. The geotechnical drilling firm can often assist with determining the best locations for drilling depending on the goals for the operation.

Geotechnical drilling operators can carefully extract a vertical column of earth that clearly captures samples from the various layers. The core sample may be analyzed in the laboratory for composition, stone integrity and other issues. The lab can determine if an area is prone to sinkholes, liquefaction or other issues. If an area lacks stability, it may not be suitable for certain types of structures, while other developers may need to alter their building plans to suit the landscape.

Sinkhole detection is another potential application for geotechnical drilling. Lake Magdalene drilling technicians can drill into areas where a potential sinkhole risk has been identified. A sinkhole can arise due to the formation of an underground cavity. These cavities develop when the soft limestone bedrock dissolves due to exposure to the relatively mild acids in the groundwater. A sinkhole is the result when that cavity collapses. Excessive weight from a structure or environmental conditions (such as heavily saturated earth) can lead to a collapse.

Geotechnical drilling can reveal the location of a void, which can then be filled with cement to prevent a collapse. In the case of an existing building, the drilling rigs can be used to determine the depth and quality of the limestone bedrock. Metal stakes can be driven down into the bedrock, then affixed to the structure’s foundation to offer support in case of a sinkhole collapse.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

 

Geotechnical Drilling Mango The Benefits of Geotechnical Drilling

/in , /by

Mango property owners and developers can use geotechnical drilling services as an essential technique for evaluating the suitability, integrity and composition of a building site, while owners of an existing structure can evaluate the ground for the presence of problematic ground structure, such as underground voids that could collapse into a potentially deadly sinkhole.

Geotechnical drilling has a few different uses. This drilling method uses a hollow tube to extract a vertical column of earth, with the various layers intact. This core is removed from the ground and sent out for analysis. Based on the results, developers and engineers can determine if the site can support a new structure or if the area may be prone to ground shifting or even collapse from a sinkhole.

What Process is Used When Performing Geotechnical Drilling?

Mango area geotechnical drilling firms utilize portable drilling rigs, which are transported to the site in question. The cost and timeframe of a geotechnical drilling project will depend upon factors such as:

  • the number of core samples or drilling sites that are required;
  • the size of the site that’s being evaluated; and
  • the density of the earth at the site.

Once core samples are extracted by the geotechnical drilling technicians, they are usually sent out for analysis and evaluation. This process is used to determine the density of the stone layers and soil/sand layers, the overall moisture content, the strength and integrity of bedrock and the composition, thickness and depth of the ground layers.

Geotechnical drilling is also effective at revealing the location of possible sinkholes. In areas with limestone bedrock, the limestone is prone to dissolving when it comes into contact with the mild acids that are found in groundwater.

In cases where geotechnical drilling does reveal a void underground, the geotechnical drilling team can use strategic drilling techniques to locate the approximate location of the void. Drills are used to penetrate into the cavity. Then, sinkhole remediation experts can pump it full of cement to prevent a collapse. If a structure is located atop a possible sinkhole site with unstable ground, metal poles may be drilled into the bedrock as anchors. (The geotechnical drilling team can determine the depth of the bedrock and whether it’s of sufficient quality and density.) The other end of each metal pole is attached to the structure’s foundation, serving as a support.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*