Sinkhole Investigations Keystone The Cost of Missing a Sinkhole investigation

/in , /by

The probability of an active sinkhole in many areas of Florida is quite high, as most of Florida has the right geological conditions where certain sediments can erode away, causing holes to form in the ground. If you think that there may be an active sinkhole on your property, as there are many signs that one is forming, it should be important that a homeowner calls geotechnical drilling professionals for sinkhole investigations. Keystone residents might think that a sinkhole investigation is a lot of money, but it is nothing in comparison to how much damage a sinkhole can cause.

Sinkholes can Destroy Homes

In order to put into perspective how costly a sinkhole can be for homeowners, consider the fact that some sinkholes grow so large and so fact that they can swallow up a good portion of a home. With the help of professional sinkhole investigations, Keystone residents could have prevented a sinkhole potentially from wrecking their home. If sinkholes are caught early they can be remediated, however if they are not caught there is no telling how much damage it will cause. Keep in mind that many would-be home buyers are not going to want to consider a home that has been damaged by a sinkhole in the recent past.

Sinkhole Investigations May be Covered by Insurance

If homeowners are worried about the cost it would take to get a sinkhole investigation or the cost of having it repaired, consider looking into sinkhole insurance. When it comes to sinkhole investigations, Keystone residents should be made aware that most if not all the costs associated with sinkhole investigations may be covered by your insurance. An insurance company is going to want to make sure there is an active sinkhole on their client’s property before they make any plans for fixing the situation. This alone makes sinkhole investigations worth it, as it saves homeowners money and can potentially save their home and property.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Survey Keystone What Information Does a Geotechnical Survey Tell Us?

/in , /by

In order for a geotechnical drilling company to gain vital information about a location they will be working in, they should start by performing a geotechnical survey. Keystone residents should know that geotechnical surveys are immensely important to a drilling professional, as the information that they provide can help in many aspects of geotechnical drilling, such as what equipment should be used, how deep should a hole be drilled, and if there are any anomalies that could be a problem or potentially dangerous.  Although this information is common knowledge to geotechnical drilling professionals, many residential homeowners are curious to know what type of information does a geotechnical survey tell professionals?

Is There An Active Sinkhole on the Property?

One of the bigger pieces of information that can be determined from samples of a geotechnical survey is if there is any sinkhole activity present at a location. Sinkholes are a massive issue in the state of Florida, but luckily if there is a problem under the surface of a location, it can be discovered through performing a geotechnical survey. Keystone residents should know that if there is a sinkhole at a location, that does not always mean that it is not suitable for building or that homeowners should evacuate. It is also possible to fix a sinkhole by many methods, helping stabilize it and preventing any damage in the future.

What Soils and Sediments are Present

Another important piece of information that can be determined after a geotechnical survey is performed is what types of soil and sediments are present at a location. This doesn’t sound all too useful to some, but to geotechnical drilling professionals, it can help them determine what equipment they should be using from the information provided by a geotechnical survey. Keystone residents should know that certain types of sediments have specific hardness levels, which means that some materials are too strong to be drilled into with simple drill bits. This can save professionals a lot of time with trial and error when trying to drill a boring whole in a new location.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Drilling Keystone Geotechnical Drilling at Beach Locations

/in , /by

Geotechnical or environmental drilling is an important service to many communities around the country. They can be found working in urban centers and cities, as well as in rural areas for people needing to gain access underground. One place that people might be wondering if drilling professionals work in are coastal and sandy location like the beach. Buildings built along the coast, including things like fishing piers and ports, all have drilling professionals working on them at some point or another. Beach locations are a little more challenging than people might imagine. They think that drilling to the sand would be easy with modern equipment, but this is not always the case. One of the most common reasons why a drilling company would be called a beach location is to perform foundational drilling for a new structure.

Sandy Locations Are Often Closer to the Water Table

One of the biggest issues that can happen to drilling professionals when they are drilling at a beach or in a coastal region is that the deeper, they have to drill, the higher chance there will be that they will hit water. Even though water doesn’t sound like a big deal, drilling through water can make things much harder. When it comes to Drilling, Keystone drilling professionals will have to use special equipment that is much more suitable for drilling through water or muddy sediment for future construction.

Special Equipment for Beach Locations

Even when water is not a main concern for drilling professionals when they are working at a beach, the loose and shifting sediment of sand can be a challenge in it of itself. When drilling, Keystone professionals will have a hard time keeping the boring hole intact if the sediments are constantly shifting to fill the void that was created by the drill rig and drill bit. In situations like this many drilling professionals will have special equipment to make the task much easier and efficient, similar to how drilling professionals would use special equipment in order to drill into locations with high moisture.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of *Amdrill Inc*

Geotechnical Drilling Keystone An Overview the Functions of Geotechnical Drilling

/in , /by

Keystone property owners and developers can turn to geotechnical drilling service providers for assistance with drilling that can be used to evaluate the suitability and even the safety of an area of land.

What is Geotechnical Drilling?

Keystone geotechnical drilling service providers can assist with a number of different situations. One commonplace purpose for geotechnical drilling is to evaluate the composition, integrity and suitability of the land in a particular location.

Geotechnical drilling involves bringing out portable drilling rigs that are positioned at strategic locations on the property in question. The drilling technicians oversee the process of drilling into the ground and even down into the underlying bedrock.

The drilling process can be used to extract what’s called a core sample, which is a vertical column of earth that can be sent to a laboratory for analysis of the composition and integrity. This is critical information when it comes to evaluating the property for its suitability for a particular type of building project. This insight makes geotechnical drilling critical for developers and builders. In some cases, the building plans may be altered to accommodate the unique composition of the earth in a particular location.

There’s also another common use of geotechnical drilling. Keystone natives often hire a drilling company in cases where a possible sinkhole site is suspected. Sinkholes form when an underground void forms, often due to the dissolution of limestone bedrock. Limestone dissolves when exposed to relatively mild acids which are found in groundwater, resulting in a cavity that can collapse, forming a sinkhole.

Geotechnical drilling rigs can detect these underground voids or areas of degraded limestone that may be subject to problems in the near future. Based on the results of the drilling, sinkhole remediation efforts may be initiated. This can include measures such as drilling into the void and filling it with cement so it does not collapse into a sinkhole in the future. In other cases, the remediation measures may include stabilizing a structure by running metal poles into the bedrock. Those poles are then secured to the structure’s foundation, serving as a support in case the ground does give way. In this case, it’s important to know the depth and quality of the underlying limestone bedrock and that’s exactly where geotechnical drilling can be useful.

Geotechnical drilling operations can take anywhere from a day or two to several weeks, depending upon the nature of the project and the size of the site.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*