Foundational Drilling Winter Park

Geotechnical drilling professionals can find themselves working in many different geological conditions in order to gain access or collect samples to see what is going on below the surface of a specific location.

Although the state of Florida’s geological conditions are not all the same from location to location, it is most common to run into sandy or loose soils, with the occasional run in with limestone sediments. This is due to the fact that most of Florida was underwater for millions of years and slowly rose up over time.

This makes many people wonder if in sandy locations is it possible to perform foundational drilling? Winter Park residents might know that foundational drilling is essential when erecting new structures, but could loose and shifty soils cause problems during this process?

Why Sandy Soils Can Cause Problems During Foundational Drilling

Many people think that because sand is so small and soft when compared to other types of soils and sediments, it must be easy to drill into for a geotechnical drilling company. While it can be easy to dig into the sand, the material itself is not the difficult aspect which can cause problems during foundational drilling. Winter Park residents should know that sandy soils can be tricky to deal with because they move around a lot.

Imagine trying to drill a boring hole for foundational drilling and to build a solid foundation for a future structure, only to have the hole being slowly filled up with sand moving into the boring hole.

Another problem with drilling into sandy soils is the risk of running into groundwater is much higher. This is because sandy soils are more common in areas that are close to coastal areas in the state of Florida.

How Can Foundational Drilling be Done in Sandy Locations?

In order for drilling professionals to be successful at making boring holes or collecting samples for later foundational drilling, Winter Park geotechnical drilling companies are going to have to use the right equipment that would do well for the job.

For example, depending on the geological conditions at the locations, it may be common for a drilling company to use injection drill bits when they are performing foundational drilling in sandy areas. This type of drill bit releases water or injection fluid that will cause the loose and sandy soils to clump up, making it much more likely that they will stay in place when drilling a boring hole.