Drilling Treasure Island Geotechnical Drilling in Mud

/in , /by

Professionals of geotechnical drilling companies have to drill in many geological conditions and adapt accordingly in order to be effective and efficient. In the State of Florida, Treasure Island residents know that most of the sediment of the state is sand, and sand can be challenging drilling into without the proper equipment and techniques. Additionally, it is highly likely that when someone is drilling through sand that they will eventually hit water and have to adapt to mud. Although mud and sand are similar, they need to be addressed differently in order to get the job done.

What are some Issues When Drilling Through Mud?

Even though mud is not known for something that is particularly damaging to humans, it can be damaging or at least hindering tools and equipment that are used in geotechnical drilling. Treasure Island professionals have to use special drills called mud rotary drills in order to effectively move through the wet sediment. What can happen is that mud can get into hard to reach areas of a drill or drill bit and ruin its efficiency and effectiveness at drilling. Eventually the mud will lose its moisture and dry up in which it would be much easier to remove and clean, but it still takes a while to do so.

What is a Mud Rotary Drill?

There are specific drills, drill rigs, and drill bits that are essential to perform mud rotary drilling. Treasure Island residents might not be aware that this is not a new technology, and it has been around since the late 19th century. It is very common to see mud rotary drilling when a geotechnical drilling professional is performing well construction. This is because a well has to be deep enough in order to gain access to groundwater, and sediments often get affected by this the deeper professionals have to go to finish the job. Mud rotary drill rigs are able to effectively go through mud unlike some other traditional drill rigs.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Environmental Drilling Treasure Island Is Environmental Drilling the Same as Geotechnical Drilling?

/in , /by

Environmental drilling is a type of service that is offered by geotechnical drilling companies for members of their community. Yet many people do not understand what it means to perform environmental drilling. Treasure Island residents are quick to assume that environmental drilling must be different from geotechnical drilling because they have two separate names. Believe it or not but environmental drilling and geotechnical drilling services have more in common than you might think, even though they have different names. Both of these areas have similar services that many individuals could benefit from.

What is Involved with Environmental Drilling?

As stated above, many of the services that are involved with environmental drilling and geotechnical drilling are the same. When it comes to a drilling professional talking about environmental drilling, Treasure Island drilling companies might be implying they are doing drilling work in areas that are hard to get too normally. This could be woodlands and wetlands, as well as coastal or marine areas. Drilling sites in these locations often get the same services that would be in geotechnical drilling, but often times with modified equipment such as special drilling rigs or drill bits.

What Kinds of Services are used for Environmental Drilling?

No matter if it is geotechnical drilling or environmental drilling, Treasure Island residents who call upon a drilling company are going to get similar style services depending on the situation. Most drilling services are done to gain access underground for future construction projects or renovations. Additionally, with some areas that are harder to get to in environmental drilling, some companies or owners need to collect samples to understand what that specific piece of land has to offer. Often times in harder to reach areas of environmental drilling, special rigs and tools must be used to get the same job done that is considered geotechnical drilling.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Treasure Island Important Information for Geotechnical Drilling Professionals on Location

/in , /by

Some individuals might be under the impression that a geotechnical drilling company knows everything they need to know before they arrive at a location to performing geotechnical drilling. Treasure Island residents should be aware that this is not the case, and in fact, many geotechnical drilling professionals often need to perform further investigations to have all the information they need. Most of this information will further determine the course of action geotechnical drilling professionals should take, and what equipment would be best for the job at hand. Here are some important pieces of information that geotechnical drilling professionals discover while being at a location.

Soil and Sediment Conditions

Believe it or not, but most of the time geotechnical drilling professionals have no idea what the soil and sediment conditions are like at a specific location. Different kinds of soils and sediments often prompt professionals to use different types of equipment. In geotechnical drilling, Treasure Island residents might not know that some sediments are too hard for standard drill bits, and often have to have diamond or titanium tipped drill bits. Additionally, if soils are too loose some types of drill bits will not work as well as they should.

The Amount of Water at a Site

Regardless of the soil or sediment conditions, another aspect of a drilling location that could affect the time it takes to complete the tasks or how difficult it will be is the amount of water present. In the state of Florida, it is almost guaranteed that any deep drilling project is going to have issues with water. In geotechnical drilling, Treasure Island professionals have to use special drilling rigs that can easily drill through areas that are saturated with water. It may be hard to determine how much water is at a location without first drilling and taking core samples.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*