Drilling St. Petersburg Extra Precautions Needed When Drilling Through Sand

/in , /by

There are a large portion of people who wish they could be at the beach every day with their toes in the sand because it is a great way to get away. Sand is very fine, and oftentimes is soft to people and therefore comfortable, but sand is not liked by everyone. A professional drilling company does not like jobs that are on the beach or in sandy areas because believe it or not, it can be very difficult to deal with sand when performing geotechnical drilling. St. Petersburg residents might not be aware of the fact that sand is difficult to drill into and in the right conditioners, can end up ruining or damaging different types of drill and drill bits.

Sand Can get Caught in Drills and Drill Bits

Because sand is so small and fine, it can be found practically anywhere. It is very easy for sand to get into normally hard to reach areas, such as in between the cracks and grooves of equipment while drilling. St. Petersburg drilling professionals often run into this problem when they are using a hollow stem auger to perform an SPT test. This is particularly troublesome because it can potentially prevent drilling professionals from obtaining an accurate sample to see what conditions are like below the service of the sandy area.

Sand can Easily Shift

Regardless what kind of tools and equipment is being used on location when performing geotechnical drilling, St, Petersburg residents probably do not know how it can be very difficult to drill into because the sand will keep shifting. Consider a boring hole and how quickly sand can pile into the hole once the drill is removed. In order to stop loose sand from quickly moving into a boring hole, drilling professionals will have to add some type of fluid or liquid that causes the sand to clump so that it will hold in place even after being drilled into.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling St. Petersburg Do Drilling Professionals Ever Face Difficult Access Situations?

/in , /by

Many individuals are under the impression that with the assistance of fancy machinery that drilling is easy no matter the occasion or location. Even though machines do make geotechnical drilling easier for professionals, it does not fix every complication that could cause problems. In geotechnical drilling, St. Petersburg professionals have to be wary of sites that create difficult access drilling for the holes they are drilling or the samples they are creating. But what kinds of instances cause a site to be difficult to access with heavy machinery? Is it a problem that is always present when drilling?

Not the Right Tools for the Job

It is quite possible that one of the reasons why a professional drilling company is having issues with accessing a site is because they did not break the necessary tools. This happens more so because of not knowing what are the geological conditions of the site as opposed to physically not bringing the correct tools. In Geotechnical drilling, St. Petersburg residents need to be aware of what conditions are like at a location because it can help determine what kinds of drilling rigs and drill bits to bring to get the job done as effortlessly and efficiently as possible. Using the wrong equipment can not only mess up the job at hand, but it can also cause it to take much longer than it should.

Geological Conditions that Cause Complications

Apart from man-made error causing problems accessing a location, a sight can simply be difficult to access because of the geological conditions. Certain types of terrain, or certain ecosystems make it much harder to get around vegetation or even standing water. In geotechnical drilling, St. Petersburg professionals have to worry about different qualities of soil, from conditions that are too hard to drill through like specific types of sediments, or soil can be too loose and shift too much like beach sand. Many times, a site is difficult to access because of environmental implications.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*