Not everyone is aware of the fact that geotechnical drilling professionals may be working in areas with a lot of water present. While groundwater may be quite common throughout much of the state of Florida, geotechnical drilling professionals can also find themselves working in large bodies of water inland, or off the coast in the open ocean.

When drilling professionals are working in the ocean off of the coast in Florida, they will most likely be drilling from barges, which professionals will often call it barge drilling. Del Rio residents may have seen one of these large barrages before, as they are vitally important when doing any sort of marine drilling.

Barges however are not always the same. In fact, many drilling companies will have many barges depending on the specific location and situations that professionals are working in. Today we will be going over some of the information about drilling professionals and the barges that they use on a regular basis.

How Big are the Barges That Are Used in Marine or Geotechnical Drilling?

Barges themselves can be made of almost any size. Smaller ones are used for more inland areas, while super large barges are used in transporting and shipping, but what about the ones used in barge drilling. Del Rio residents should know that a good geotechnical drilling company will use barges of all sizes depending on the drilling task or location.

For example, medium to larger sized barges may be used as a nice drilling rig when working off the coast at a good distance, but smaller ones may be used closer to land or up in a large river or estuary.

The barge sizes themselves may also be chosen by the size of the drill that a professional is using. It should come as a surprise to no one that larger drills are going to need larger barge rigs to hold them steady on the surface of a body of water.

Are Barges Used in Inland Drilling?

Badges are commonly seen out on the open ocean, but do drilling professionals use their barge drilling rigs when working in an inland body of water? While it can be possible that barges are used on an inland body of water during barge drilling, Del Rio residents should know that oftentimes other forms of watercraft are preferred.

Barges are big and bulky, so they can easily become hard to use in an inland body of water, especially when that body of water is full of vegetation and other items that would restrict movement.

For that reason, it is more common to use smaller boats to help with inland waterway drilling. For example, professionals may prefer to use an airboat in an area like an inland river than they would to use a barge to perform marine drilling.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical drilling is a type of service that requires a lot of different tools and equipment to be successful. This is because there are many different types of soils and sediments that have different qualities or properties that can drastically affect the success rate of the drilling equipment.

Some of these pieces of drilling equipment are more universal and can be used in a variety of situations, why other drilling equipment tend to be hyper specific for one kind of task or geological condition.

One of these pieces of equipment that a professional drilling company will use is a mud rotary drill bit, used in mud rotary drilling. Del Rio residents can probably already guess what this drill bit is used for, but many people will ask how well a mud rotary drill bit will work in other soil and sediment conditions in the state of Florida.

What are Mud Rotary Drill Bits Used For?

Mud rotary drill bits are one of the many different types of drill bits that are used to gain access to a specific location underground.  As the name implies, with mud rotary drilling, Del Rio residents can probably guess that these drill bits are going to be used in situations that have a lot of mud present at a specific location.

In the state of Florida, as well as other areas around the country, seasonal rains and a high amount of groundwater can make it very likely that drilling professionals may run into mud quite frequently. 

Many people might be under the impression that it is easy to drill into mud, but this is often not the case. Drilling into mud is especially challenging when trying to do specific tasks such as creating a boring hole or trying to collect a geological sample of the location.

Why Mud Rotary Drill Bits Don’t Perform Well in Harder Sediments

There are some pieces of drilling equipment, specifically the drill bits, that can be used in a variety of geological or sedimentary conditions, but when it comes to mud rotary drilling, Del Rio residents should know that mud rotary drill bits are not very good in other conditions.

This has to do with the qualities of mud when compared to other types of soil or sediments. Mud rotary drill bits are very good for drilling into softer materials, such as sand or water, which is essential for mud. However, they are not good in situations where soils and sediments have a higher hardness.

This has to deal with the construction of the drill bits themselves, and for harder sediments, it is important to have drill bits made from harder materials. For example, for really hard sediments, drilling professionals may use drill bits with a diamond tip.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical drilling companies do a lot more work for members of their community besides drilling into the ground to help an individual or company gain access underground. There are a few services outside the larger group of geotechnical drilling tasks that professionals are able to help with.

One of the more common examples of one of these additional services that can help various people living in the state of Florida is sinkhole investigation services. As a geotechnical drilling company, Del Rio residents should know that sinkhole investigations are very similar to geotechnical investigations that drilling professionals will perform on a regular basis.

Sinkholes can be very common in areas that have the right geological conditions, and for much of the state of Florida, sinkholes can be a serious issue that homeowners need to be careful of. If you think there is an active sinkhole on your property, it may be best to have an investigation performed by a professional that handles these actions.

Contact with Insurance Companies First

If you suspect that there may be an active sinkhole that is on your property, first homeowners need to know if their home insurance covers sinkhole remediation and damages.

If you are someone who has good insurance coverage, it would be a good idea to contact these professionals, as they will have to have another professional come out to the location and find evidence of an active sinkhole.

When it comes to a geotechnical drilling company, Del Rio residents should know that insurance companies will contract these professionals to perform sinkhole investigations, as they do not have the tools or equipment needed to do so themselves. Keep in mind that an insurance company will not get involved with a sinkhole insurance claim until they have accurate evidence of a sinkhole that is present.

Contacting a Geotechnical Drilling Company Directly

Not everyone will have home insurance that covers sinkhole activity and getting professionals out to perform an investigation. If this is the case for you, do not think you can avoid the need to contact a professional geotechnical drilling company. Del Rio residents need to be aware how dangerous and damaging sinkholes can be, and it is best to correct them early before they become too large.

Even if a geotechnical drilling company is not being contacted by an insurance company, they can still assist homeowners if they fear there is an active sinkhole on their property.

Samples of the ground are going to need to be taken in order for drilling professionals to accurately say whether the specific signs a homeowner is seeing in or outside their home is the cause of an active sinkhole.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

 

There are many homeowners who would benefit from having access to some sort of water well on their property. Luckily for homeowners in the state of Florida, there are many great locations where this can be done, as there is not too much distance between groundwater and the surface above.

Creating a water well in a residential area is not as easy as drilling a hole deep enough until you hit water. A lot of preparation and thought needs to go into constructing a water well with professionals that specialize in services related to the geotech environmental. Del Rio residents should know that accessing groundwater can affect other individuals who are also connected to the same water supply.

Even though some people might imagine that drilling a water well is something that is easy to do, it can sometimes be a lot harder than what people may realize. Here we will go over some of the difficulties of geotechnical drilling professionals creating water wells for their clients.

Finding the Ideal Location for Water Well

As stated above, there are many great places throughout the state of Florida that would be perfect to have a water well constructed. However, there are also areas around these areas that are not so suited for water well construction.

When talking about geotechnical drilling professionals and services related to geotech environmental, Del Rio residents should know that access to groundwater is the more crucial aspect, however there is more to it than that.

Convenience is also an important factor when trying to construct water wells in residential areas. A homeowner on a large property may not want to walk a good distance for them to have access to water. Most homeowners would like their water to be close to their resilience, and this simply due to the convenience factors of it all and logistics.

Understanding that Water Wells are Interconnected

Most people want a water well on their property because they want their own access to water without the involvement of a water company to pay each month. While it is true that using a water well on your property can lower your reliance on a water company, it needs to be stressed that a water well is not solely yours alone.

When getting groundwater through efforts of geotech environment, Del Rio residents should know that many people in their vicinity who also have water wells on their property are most likely using the same source of groundwater.

This is important to notice because too much water use can hinder water well’s effectiveness for others, and anything that goes wrong with the water supply will affect others too. This is important to know about because unused water wells need to be sealed up to not affect others use of groundwater.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

 

Professional drilling companies can end up helping out many different types of clients, ranging from residential homeowners to business clients. This is because many different people rely on gaining access underground in some capacity, and it is not always easy to do so.

One large client base that geotechnical drilling professionals use quite often to help gain access underground are construction companies. There are many types of construction efforts that are dependent on geotechnical drilling services.

Yet, even at construction sites, There are many issues that can be present which could cause instances of difficult access drilling. Del Rio residents might be under the impression that construction companies will handle their own drilling efforts, but oftentimes they do not have the tools needed to perform geotechnical drilling, or know or to fix specific ground issues that could affect current or future construction.

Needing Geotechnical Samples and Survey Information

One of the reasons why so many people can have issues with accessing locations underground at construction sites is because there is not enough information about the specific location. Many people mistakenly believe that gaining access to a location underground is as simple as using a powerful drill, but this is not always true.

Different geological conditions can make some pieces of drilling equipment more successful or less successful, so it’s important for professionals to know what geological conditions are like to potentially avoid situations of difficult access drilling. Del Rio residents should know that collecting samples and performing an in depth geotechnical survey could let professionals know what the best equipment at a location would be.

Geotechnical Surveys and samples are also important because not only do they give professionals more information about the ground they are working in, but it can also show signs that a much serious problem could affect construction efforts.

Problems Underground That Can Ruin Construction

It should surprise no one that there are some issues that may be hiding underground at a construction site that can cause difficult access drilling. Del Rio professionals may have to deal with not ideal drilling conditions due to soil and sediment composition, but there are some issues that make it much harder to perform the basics of drilling tasks.

For example, the presence of groundwater can make it very difficult to continue effectively with drilling at a construction site. Being in the state of Florida, more areas around the state have groundwater only a few feet down, and this can be made worse due to seasonal rain.

Another serious issue that drilling professionals may discover underground is the presence of an active sinkhole. This makes construction dangerous to perform.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*