Drilling Bayport Can Anyone Perform Geotechnical Drilling?

/in , /by

Performing geotechnical drilling is important to many industries, most importantly to the construction industry. Many companies and local jurisdictions are in dire need of professionals who are able to drill into the ground at a location for future construction or for sample collection. This leads many individuals to wonder if anyone with the right equipment can perform geotechnical drilling? Bayport residents should be made aware that not just anyone can do it because it takes many years for one individual to learn all the different types of equipment that is being used as well as the science and geology behind what it is there are drilling into on a location.

Equipment Used in Geotechnical Drilling

Many people falsely assume that drilling into ground is nothing more than a couple of professionals with shovels trying to reach a specific length. It should be known that digging is not the same as geotechnical drilling. Bayport residents should know that the most important piece of equipment used by a geotechnical drilling company is a drill and the rig associated with it. Drills come in many shapes and sizes based on the geological conditions at a site, such as the different types of soil and sediment or how deep the drilling hole must be. The other crucial pieces of equipment important to geotechnical drilling are the drill bits that do most of the work on a job site.

The Science Behind Geotechnical Drilling

Operating drilling equipment such as a drill rig is a completely different skill set then being able to determine geological conditions and what they mean in relation to what tools need to be used. When it comes to drilling, Bayport professionals often have to collect soil samples in order to determine what equipment would get the job done the fastest and the cleanest. For example, not all drilling equipment or drill bits are able to easily or effectively go through sand because it is a loose material. With just a drill alone, it would be very hard to create a bore hole that does not shift or collapse because of shifting sands.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*

Geotechnical Drilling Bay Port Using Auger Bits in Geotechnical Drilling

/in , /by

For people who are not well versed in the field of geotechnical drilling, Bay Port Residents may be hard to convince that different types of soils cause problems for a drill or a rig. Sometimes the hardness of a sediment or rock can cause complications when drilling a foundation or a well, but it can be just as difficult to drill through softer and shifting soils. The deeper you go to drill an access well, the more the loose sediments would shift and fill up the hole, defeating the purpose of it. This is where auger bits for drills come in handy for professionals.

What is an Auger?

The name auger is used to determine the shape of something, usually a tool or a drill associated with geotechnical drilling. Bay Port residents can recognize them as a tool with a helical shape similar to that of a skew. For drilling companies, these types of drills come in all shapes and sizes and are used depending on the task at hand. Most augers are used to gain access and not collect samples for testing such as some core or boring drill bits. Rather than collecting the dispersed material, an auger’s shape moves that material out of the way.

When Should an Auger Bit be Used?

As stated above, the best situation to use an auger drill bit is loose or shifting soils. Auger drill bits are rather important for the state of Florida and Performing Geotechnical drilling. Bay Port residents might also see drilling professionals using auger drill bits in other places that are sandy such as a coastal region, or in the middle of a desert. Shifting soils and sediments are often the most difficult terrain for drills to perform in if they are not equipped with the right type of equipment.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*