Difficult Access Drilling Kissimmee Different Types of Soils and Sediments Causing Difficult Access Drilling

Geotechnical drilling takes a lot of knowledge and technical know how that many people are not aware of. It is not uncommon for someone to think that geotechnical drilling is as simple as putting a drill to the ground, but this is not true.

There is a lot more that goes into the process of drilling than people realize, and it is not always as easy as people make it out to be. For starters, drilling is not the same thing as digging a hole in the ground.

There are many instances where drilling is difficult, and in these situations, professionals will refer to these tasks as difficult access drilling. Kissimmee’s residents may not realize that different types of soils and sediments can drastically affect drilling efforts, and in some instances, it can make geotechnical drilling nearly impossible.

Soft and Shifty Soils Causing Drilling Issues

Sometimes the soils or sediments that people think would not be a problem for geotechnical drilling professionals when working for their clients ends up being some of the more challenging drilling conditions.

For example, many people believe that drilling into sand is something that is easy to do, which it can be, but soft and shift soils can make it much harder to do specific drilling tasks, such as creating a boring hole.

In the state of Florida, many areas are just sandy soils, and this can often create situations of difficult access drilling. Kissimmee’s residents should know that if drilling professionals are working in sandy locations, their best way to avoid difficult access drilling is to use the right equipment, like an injection drill bit.

Presence of Groundwater Causing Drilling Issues

Another common issue that can make it much harder to drill into a specific location is when groundwater becomes a big part of the process. This can happen after a period of significant rainfall, but it can also happen a lot because groundwater is quite common in Florida.

The closer someone is to sea level, the more likely it is that finding groundwater will be easy after only a few feet of drilling. Groundwater is quite common throughout Florida because most locations are next to the extensive aquifer system.

Like that of sand, groundwater is not easy to drill into, and it can create instances of difficult access drilling. Kissimmee’s residents should know that a lot of times, the presence of groundwater can ruin drilling efforts. Like using the boring hole example in above, groundwater may compromise a boring hole, and ruin drilling efforts.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*