Drilling St. Petersburg Extra Precautions Needed When Drilling Through Sand

There are a large portion of people who wish they could be at the beach every day with their toes in the sand because it is a great way to get away. Sand is very fine, and oftentimes is soft to people and therefore comfortable, but sand is not liked by everyone. A professional drilling company does not like jobs that are on the beach or in sandy areas because believe it or not, it can be very difficult to deal with sand when performing geotechnical drilling. St. Petersburg residents might not be aware of the fact that sand is difficult to drill into and in the right conditioners, can end up ruining or damaging different types of drill and drill bits.

Sand Can get Caught in Drills and Drill Bits

Because sand is so small and fine, it can be found practically anywhere. It is very easy for sand to get into normally hard to reach areas, such as in between the cracks and grooves of equipment while drilling. St. Petersburg drilling professionals often run into this problem when they are using a hollow stem auger to perform an SPT test. This is particularly troublesome because it can potentially prevent drilling professionals from obtaining an accurate sample to see what conditions are like below the service of the sandy area.

Sand can Easily Shift

Regardless what kind of tools and equipment is being used on location when performing geotechnical drilling, St, Petersburg residents probably do not know how it can be very difficult to drill into because the sand will keep shifting. Consider a boring hole and how quickly sand can pile into the hole once the drill is removed. In order to stop loose sand from quickly moving into a boring hole, drilling professionals will have to add some type of fluid or liquid that causes the sand to clump so that it will hold in place even after being drilled into.

*Disclaimer: The views expressed here are those of the authors and do not necessarily represent or reflect the views of Amdrill Inc*